Mechanical Engineering Assembly Employee - Shipbuilding | Papendrecht

• An education at VMBO level or demonstrable work experience as an Assembly Employee or Ship Metalworker.
• A healthy work mentality: you enjoy coming to work, but you also find your work-life balance important;
• Preferably in possession of a valid VCA or VCA-Vol certificate;
• You enjoy working together and realize how important this is (communication in Dutch and/or English);
• Experience with reading drawings, measuring, marking out, tack welding, grinding, and cutting;

• Stability: Annual contract and subsequent permanent employment (upon a positive assessment). We have a well-filled order book, allowing us to keep our people continuously working;
• Profession-specific training such as: VCA, horizontal and vertical movement of equipment;
• Possibility to participate in BHV (Emergency Response);
• Internal guidance so that you can develop (further);
• CAO Metalektro, 27 days off + 13 ADV days;
• Overtime compensation Monday through Saturday 175%, Sundays and public holidays 225%;
• Active Staff Association;
• Metalektro Pension Fund; premium more than 50% paid by the employer;
• Travel/work allowance of € 0.25 per km.
• Possibility to participate in BHV (Emergency Response);
• Internal guidance so that you can develop (further);
• CAO Metalektro, 27 days off + 13 ADV days;
• Active Staff Association;
• Travel/work allowance of € 0.25 per km.

For the Mechanical Engineering Assembly department, we are looking for an Assembly Employee.

Within this department, you will assemble doors, hatches, and frames. You will also install equipment, pumps, drip trays, and foundations. Additionally, this department carries out modifications to previously constructed structures on board a superyacht hull.

Do you have similar experience in Yacht and Shipbuilding, or are you technical and eager to learn? Then you are very welcome to come and interview with us!

• Working independently using drawings and parts lists;
• Small and medium-sized ironwork;
• You work with great precision. The allowed tolerance is between +2 mm and -4 mm. The maximum deviation over a length of 6 meters is -3 mm;
• Relatively thin material, maximum thickness 8 to 10 mm;
• Tack welding in all applicable positions with coated electrodes;
• Independently operating a crane, meaning being able to safely hoist and move loads;
• Ensuring a clean and safe working situation.
• Small and medium-sized ironwork;
• Relatively thin material, maximum thickness 8 to 10 mm;
• Ensuring a clean and safe working situation.